T. Fritsch, Ch. Hopmann Adaptive production of components with locally graded fibre architecture. In: Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk an der RWTH Aachen (ed.): Proceedings of the 33rd International Colloquium Plastics Technology, 2026, p. 533-543, ISBN: 978-3-8191-0527-2 – https://www.dedigrad.de/en/publications/adaptive-production-of-components-with-locally-graded-fibre-architecture-in-institut-fur-kunststoffverarbeitung-ikv-in-industrie-und-handwerk-an-der-rwth-aachen-hrsg-proceedings-of-the-33rd-in/
K. Roder, M. Büttner, J.H.M. Stiller, D. Breinl, D. Löpitz, M. Knobloch, D. Nestler, W.-G. Drossel, L. Kroll Poster: Untersuchung des Infiltrationsverhaltens novolakbasierter Kurzfaser-Compounds in unterschiedlichen textilen Flächengebilden, Symposium of Composites 2026 Chemnitz. – https://www.dedigrad.de/wp-content/uploads/2026/03/2026_Roder_VWT.pdf
L. Lise, H. Celik, R. Dahlmann, Ch. Hopmann Machine Learning-Based Stiffness Modelling for the Development of Fibre-Reinforced Thermoplastic Components. In: Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk an der RWTH Aachen (Hrsg.): Proceedings of the 33rd International Colloquium Plastics Technology, 2026, ISBN: 978-3-8191-0527-2 – https://www.dedigrad.de/en/publications/machine-learning-based-stiffness-modelling-for-the-development-of-fibre-reinforced-thermoplastic-components-in-institut-fur-kunststoffverarbeitung-ikv-in-industrie-und-handwerk-an-der-rwth-aachen/
M. Klaerner, L. Kroll, R. Svidler, R. Rinberg, K. Paetzold-Byhain, N. Modler, W.-G. Drossel, S. Ihlenfeldt Potentials of natural fibre-reinforced composites for dynamic applications, Procedia CIRP Volume 138, 2026, Pages 803-808 – https://doi.org/10.1016/j.procir.2026.01.138
H. Reinhardt, M. Mahdaviasl, B. Prell, S. Ihlenfeldt, L. Kroll, M. Klärner Through the lens of Generative AI: The expressiveness of research on validation techniques for material flow simulation, Procedia CIRP, Volume 146, 2026, Pages 451-456 – https://doi.org/10.1016/j.procir.2026.03.296
L. Freinberger, K. Key, M. Kofler, D. Breinl, W.-G. Drossel, M. Büttner, K. Roder, S. Elgeti Shape optimization using a neural implicit geometry representation, Advances in Computational Science and Engineering (ACSE), 9 (2026) 97-124. – https://doi.org/10.3934/acse.2026013
M. Möller, G. Obermair, I. Singer, C. Gollmann, A. Reali, S. Elgeti IGANets: Isogeometric analysis networks and their applications to linear structural analysis problems, Engineering with Computers, 42(3), Article 102, 2026 – https://doi.org/10.1007/s00366-026-02312-6
N. Poonia, T. Mehner, T. Lampke Talk: Electrodeposition of Fe-Co alloy coatings on carbon fibres for tailored magnetic properties in fibre-reinforced lightweight composites, Symposium of Composites 2026 Chemnitz. – https://www.dedigrad.de/en/news-events/verbund-2026-en/
C. Brecher, P. Weiler, M. Krömer, F. Fernholz, M. Fey Contextualized Storage of Process Models in a Process Database for Data-Driven Manufacturing. In: Mendling, J., Leemans, S., van Dongen, B.F., Reijers, H. (eds) Mining a Scientist’s Process. Lecture Notes in Computer Science, vol 16480. Springer, Cham, 2026, p. 212-222. – https://doi.org/10.1007/978-3-032-17618-9_16
G. Kornmaier, P. Antony, N. Hosters, M. Behr Adaptive refinement for the simplex space-time finite element method. Computers and Mathematics with Applications, 221, 225-243 (2026) – https://doi.org/10.1016/j.camwa.2026.09.010
I.M. Michael, K. Greiff Poster: Achieving Circularity through LCA Integration in Product Life Cycle Management Systems, DGAW Scientific Congress 2026, 24–25 February 2026 – https://www.dedigrad.de/en/publications/poster-achieving-circularity-through-lca-integration-in-product-life-cycle-management-systems-dgaw-scientific-congress-2026-24-25-february-2026/
H. Reinhardt, M. Mahdaviasl, B. Prell, S. Ihlenfeldt, L. Kroll, M. Klärner Talk: Through the lens of Generative AI: The expressiveness of research on validation techniques for material flow simulation, 59th CIRP Conference on Manufacturing Systems (CIRP CMS 2026), 19–21 May 2026 – https://www.dedigrad.de/en/publications/talk-through-the-lens-of-generative-ai-the-expressiveness-of-research-on-validation-techniques-for-material-flow-simulation-59th-cirp-conference-on-manufacturing-systems-cirp-cms-2026-19/
R.S. Ananya, E. Boos, L. Penter, H. Wiemer, S. Ihlenfeldt Talk: A Systematic Requirement Analysis for the Development and Deployment of Generative Artificial Intelligence in Industrial 3D Modeling and Design, 59th CIRP Conference on Manufacturing Systems (CIRP CMS 2026), 19–21 May 2026 – https://www.dedigrad.de/en/publications/talk-a-systematic-requirement-analysis-for-the-development-and-deployment-of-generative-artificial-intelligence-in-industrial-3d-modeling-and-design-59th-cirp-conference-on-manufacturing-systems-ci/
O.H. Schmidt, N. Poonia, A. Winkler, Y. Xu, S. Zhou, M. Gude, T. Lampke Talk: Experimental and numerical investigations into magnetic alignment of coated fibres in thermoplastic melts, ECCM22, Oslo, 21–25 June 2026 – https://www.dedigrad.de/en/publications/talk-experimental-and-numerical-investigations-into-magnetic-alignment-of-coated-fibres-in-thermoplastic-melts-eccm22-oslo-21-25-june-2026/
J. Keil, Y. Stuhldreher, A. Liebsch, V. Würfel, F. Adam, P. Partzsch, N. Modler Talk: Realizing Local Coverage Variations in Thermoplastic Tape-Braided Structures, ECCM22, Oslo, 21–25 June 2026 – https://www.dedigrad.de/en/publications/talk-realizing-local-coverage-variations-in-thermoplastic-tape-braided-structures-eccm22-oslo-21-25-june-2026/
E. Madia, G. Tzortzinis, A. Filippatos, M. Gude Talk: Process–Structure Insights for FE Modeling of Braided Tape Geometries in the Press-Through Process, ECCM22, Oslo, 21–25 June 2026 – https://www.dedigrad.de/en/publications/talk-process-structure-insights-for-fe-modeling-of-braided-tape-geometries-in-the-press-through-process-eccm22-oslo-21-25-june-2026/
K. Liesegang, J. Keil, A. Dementyev, A. Liebsch, N. Modler, S. Ihlenfeldt Talk: Digital Twins for In-Line Monitoring of Press Processes for Composites with 3D Grading: A Concept Paper, ECCM22, Oslo, 21–25 June 2026 – https://www.dedigrad.de/en/publications/talk-digital-twins-for-in-line-monitoring-of-press-processes-for-composites-with-3d-grading-a-concept-paper-eccm22-oslo-21-25-june-2026/
I.M. Michael, K. Greiff, J. Singh Talk: How to integrate LCA into the Design Decision-Making of Fiber-reinforced Polymer Composites, 13th International Congress on Environmental Modelling and Software (iEMSs 2026), 12–16 July 2026 – https://www.dedigrad.de/en/publications/talk-how-to-integrate-lca-into-the-design-decision-making-of-fiber-reinforced-polymer-composites-13th-international-congress-on-environmental-modelling-and-software-iemss-2026-12-16-july/
E. Madia, G. Tzortzinis, Q. Wu, A. Filippatos, M. Gude Talk: Numerical Investigation of Process-Induced Structural Effects in Pressed Braided Thermoplastic Tape Composites, WCCM/ECCOMAS 2026, Munich, 19–24 July 2026 – https://www.dedigrad.de/en/publications/talk-numerical-investigation-of-process-induced-structural-effects-in-pressed-braided-thermoplastic-tape-composites-wccm-eccomas-2026-munich-19-24-july-2026/
F. Böttger, N. Dallinger, R. Decker, L. Kroll, M. Klärner Talk: Listening to the polymer melt flow – vibroacoustic process analysis, Forum Acusticum 2026, Graz, 8–11 September 2026 – https://www.dedigrad.de/en/publications/talk-listening-to-the-polymer-melt-flow-vibroacoustic-process-analysis-forum-acusticum-2026-graz-8-11-september-2026/
S. Schwoch, B. Saske, K. Paetzold-Byhain Talk: Towards a graph-based framework of a holistic LCA-PLM integration to support environmental decision making in early phases of product development, 37th Symposium Design for X (DFX2026) – https://www.dedigrad.de/en/publications/talk-towards-a-graph-based-framework-of-a-holistic-lca-plm-integration-to-support-environmental-decision-making-in-early-phases-of-product-development-37th-symposium-design-for-x-dfx2026/
D. Haschock, J. Keil, J. Hauptmann, A. Liebsch, N. Modler, A. F. Lasagni Talk: LIBS-Based Detection of Melting Damage in Glass Fibers during Laser Processing of GFRP, Materials Science and Engineering Congress (MSE 2026), Darmstadt, 29 September 2026 – https://www.dedigrad.de/en/publications/talk-libs-based-detection-of-melting-damage-in-glass-fibers-during-laser-processing-of-gfrp-materials-science-and-engineering-congress-mse-2026-darmstadt-29-september-2026/
L. Kroll, I. Roth-Panke, M. Stącel, A. Czech Talk: Advanced Lightweight Technologies for Industry, Conference of the Polish Cluster of Composite Technologies, EXPO Kraków, 7–8 October 2026 – https://www.dedigrad.de/en/publications/talk-advanced-lightweight-technologies-for-industry-conference-of-the-polish-cluster-of-composite-technologies-expo-krakow-7-8-october-2026/
D. Breinl, M. Büttner, S. Rudolph, T. Krüger, D. Löpitz, M. Knobloch, K. Pagel, K. Roder, A. Spickenheuer, J.H.M. Stiller, D. Nestler, W.-G. Drossel, L. Kroll Talk: Process Development and Analysis of T-Beam Pultrusion with a Non-Impregnated Area for Further Graded Structural Integration, 4th CIRP Conference on Composite Material Parts Manufacturing (CIRP CCMPM 2026), 14–16 October 2026 – https://www.dedigrad.de/en/publications/talk-process-development-and-analysis-of-t-beam-pultrusion-with-a-non-impregnated-area-for-further-graded-structural-integration-4th-cirp-conference-on-composite-material-parts-manufacturing-cirp-c/
M. Büttner, D. Breinl, K. Roder, J.H.M. Stiller, T. Krüger, S. Rudolph, D. Löpitz, K. Pagel, D. Nestler, W.-G. Drossel, L. Kroll Talk: Influence of Carbon Textile Architecture on the Infiltration Quality of Novolak-Based Short-Fibre Compounds, 4th CIRP Conference on Composite Material Parts Manufacturing (CIRP CCMPM 2026), 14–16 October 2026 – https://www.dedigrad.de/en/publications/talk-influence-of-carbon-textile-architecture-on-the-infiltration-quality-of-novolak-based-short-fibre-compounds-4th-cirp-conference-on-composite-material-parts-manufacturing-cirp-ccmpm-2026-14/
X. Ni, M. Emonts, C. Brecher Talk: Parametric Investigation and Adaptation of a Multi-Material Tape Placement Applicator for the Manufacturing of Graded Thermoplastic Laminates, 4th CIRP Conference on Composite Material Parts Manufacturing (CIRP CCMPM 2026), 14–16 October 2026 – https://www.dedigrad.de/en/publications/talk-parametric-investigation-and-adaptation-of-a-multi-material-tape-placement-applicator-for-the-manufacturing-of-graded-thermoplastic-laminates-4th-cirp-conference-on-composite-material-parts-man/
K. Liesegang, P. Link, A. Dementyev, S. Ihlenfeldt Talk: A Simulation-Based CNN Surrogate for Local Fiber Orientation Prediction in Compression Molding, 4th CIRP Conference on Composite Material Parts Manufacturing (CIRP CCMPM 2026), 14–16 October 2026 – https://www.dedigrad.de/en/publications/talk-a-simulation-based-cnn-surrogate-for-local-fiber-orientation-prediction-in-compression-molding-4th-cirp-conference-on-composite-material-parts-manufacturing-cirp-ccmpm-2026-14-16-oct/
F. Böttger, R. Decker, L. Haugk, H. Reinhardt, L. Kroll, M. Klärner Talk: Feasibility of improving rib bonding on organic sheets by local gradation, 4th CIRP Conference on Composite Material Parts Manufacturing (CIRP CCMPM 2026), 14–16 October 2026 – https://www.dedigrad.de/en/publications/talk-feasibility-of-improving-rib-bonding-on-organic-sheets-by-local-gradation-4th-cirp-conference-on-composite-material-parts-manufacturing-cirp-ccmpm-2026-14-16-october-2026/
R.S. Ananya, E. Boos, D.R. Haider, S. Ihlenfeldt Talk: A Knowledge Graph-Based Representation of Parametric CAD Models for Structural Heterogeneity and Design Intent Preservation, 4th CIRP Conference on Composite Material Parts Manufacturing (CIRP CCMPM 2026), 14–16 October 2026 – https://www.dedigrad.de/en/publications/talk-a-knowledge-graph-based-representation-of-parametric-cad-models-for-structural-heterogeneity-and-design-intent-preservation-4th-cirp-conference-on-composite-material-parts-manufacturing-cirp-c/
D.R. Haider, M. Krahl, S. Spitzer, M. Gude Talk: Formalization of the mold development process for injection molding based on the MMD approach as a foundation for AI-supported methods, 4th CIRP Conference on Composite Material Parts Manufacturing (CIRP CCMPM 2026), 14–16 October 2026 – https://www.dedigrad.de/en/publications/talk-formalization-of-the-mold-development-process-for-injection-molding-based-on-the-mmd-approach-as-a-foundation-for-ai-supported-methods-4th-cirp-conference-on-composite-material-parts-manufactur/
L. Kroll, M. Stącel, F. Böttger, M. Klärner, A. Alzuabidi, I. Roth-Panke Talk: Challenges in Testing Next Generation Composite Structures, 4th CIRP Conference on Composite Material Parts Manufacturing (CIRP CCMPM 2026), 14–16 October 2026 – https://www.dedigrad.de/en/publications/talk-challenges-in-testing-next-generation-composite-structures-4th-cirp-conference-on-composite-material-parts-manufacturing-cirp-ccmpm-2026-14-16-october-2026/
R.S. Ananya, E. Boos, L. Penter, H. Wiemer, S. Ihlenfeldt A Systematic Requirement Analysis for the Development and Deployment of Generative Artificial Intelligence in Industrial 3D Modeling and Design, Procedia CIRP, 2026 – https://doi.org/10.1016/j.procir.2026.03.295
S. Schwoch, B. Saske, K. Paetzold-Byhain Towards a graph-based framework of a holistic LCA-PLM integration to support environmental decision making in early phases of product development. In: Krause, D.; Paetzold-Byhain, K.; Wartzack, S. (eds.): Proceedings of the 37th Symposium Design for X (DFX2026), The Design Society, 2026 – https://doi.org/10.35199/dfx2026.12
N. Poonia, O.H. Schmidt, T. Mehner, A. Winkler, S. Zhou, M. Gude, T. Lampke Influence of pretreatment methods on electrodeposition of magnetic Fe-Co coatings on carbon fibres, Journal of Materials Science: Composites, 7 (2026) – https://doi.org/10.1186/s42252-026-00108-x